AI PPE detection for the lapses that happen between safety rounds
They happen in front of cameras nobody is watching.
AI Bot Eye checks those camera views on-site for missing helmets, vests and other required kit, and alerts the supervisor with the image, zone and camera — so the lapse is fixed on the shift, not found in the incident report.
Prove it on your own cameras before anything goes live.
You’ve done the responsible things. Nobody can check every bay on every shift.
The PPE policy is written. The training is recorded. The signage is up and the stock is there. But a safety officer cannot stand at every dock, machine bay and process area through three shifts — and contractors change week to week.
So compliance is checked in rounds and audits. Between them, the lapse is on camera and nobody sees it — until a near miss, an injury or an audit finding brings it to light.
Each zone gets its own PPE rule
A production floor may need helmets and vests. Chemical handling may add goggles and gloves. Work at height needs a harness. AI Bot Eye checks the kit you set for that zone, during the hours you set.
Head
Helmets / hard hats
Production bays, overhead-load areas, yards, construction inside the site.
Visibility
Hi-vis vests
Docks, yards and aisles where people work near forklifts and trucks.
Eye & face
Goggles / face shields
Grinding, welding, chemical handling and dispensing.
Respiratory
Masks
Dust, fume, clean-room and pharma areas.
Hands
Gloves
Material handling and hot-work zones with close camera views.
Height
Harnesses
Mezzanines, racking, roof access and maintenance platforms.
Honest limit: what can be checked reliably depends on camera angle, distance and lighting. Helmets and vests are usually easiest; gloves and goggles need closer views. We confirm this on your actual cameras before anything is promised.
Why AI Bot Eye, not another camera project
| Manual safety rounds | New AI cameras | Cloud video analytics | AI Bot Eye | |
|---|---|---|---|---|
| Uses the CCTV you already have | Yes | No — replace cameras | Usually | Yes |
| Checks between rounds | No | Yes | Yes | Yes |
| Video stays on your site | — | Varies | No — streamed out | Yes — on-site processing |
| Fire, intrusion & PPE on one system | No | Per camera model | Varies | Yes — one on-site platform |
| Knows when a camera goes blind | No | Basic video-loss alerts | Varies | Yes — built-in camera health |
| Proven on your views before rollout | — | After purchase | Trial | Yes — on-site demo first |
Check the view. Learn the site. Prove it works. Go live.
01
Check the view
Pick 3–5 critical zones. We confirm the cameras show people clearly enough for the kit you need.
02
Learn the site
Set each zone’s rule and hours, and who gets alerted — supervisor, EHS dashboard, WhatsApp, SMS or email.
03
Prove it works
See real alerts from your own cameras before any rollout decision.
04
Go live
Start with the critical zones, then add zones, shifts and sites once your team trusts the alerts.
Safety, not surveillance. PPE detection asks “is the required kit being worn in this zone?” — not “who is this person?”. Processing stays on-site, and each site decides who receives alerts and how long event images are kept.
The same on-site platform, already running at real sites
AI Bot Eye has been proven through 50+ live demonstrations on cameras already installed at real sites. These deployments run the same on-site platform — mostly for fire detection — that PPE detection is added to.
- The Leela PalaceLuxury hospitality · fire detection
- KwalichemMulti-site chemical · fire detection
- Rolex RingsCNC manufacturing · AI CCTV
- Eastman Auto & PowerManufacturing · AI CCTV monitoring
- Fiotex CotspinTextile spinning · AI CCTV
- Little Angel by PAN250 cameras · multi-device fire detection
Deployments shown are proof of the platform, not PPE-specific results. See all deployments.
Prove it on your own cameras
Tell us the zones and kit that matter most. We’ll check your camera views, show you real PPE alerts from your own site, and only then talk about going live — alongside fire, intrusion and camera health on the same on-site system.
FAQ: AI PPE & Safety Kit Detection
Which PPE items can AI Bot Eye detect?
Sites typically configure helmets, high-visibility vests, goggles or face shields, masks, gloves and harnesses. Which items can be checked reliably depends on the camera view and distance, and is confirmed on your cameras during the on-site demo.
Does it work with our existing CCTV cameras?
AI Bot Eye works with compatible RTSP streams from existing DVRs, NVRs or IP cameras. The on-site demo confirms stream access and whether each view shows people clearly enough.
Can different zones have different PPE rules?
Yes. Each zone can require its own kit and active hours — for example helmet and vest on the production floor, plus goggles and gloves in chemical handling.
Who receives PPE alerts?
The people and channels your site configures — such as shift supervisors on WhatsApp, the EHS dashboard, SMS or email — with the image, zone, camera, time and missing item.
Does the video leave our site?
No. Core processing and continuous CCTV video stay on-site. Only customer-configured alerts and authorised support connections communicate outside the facility.
Is this used to identify individual workers?
PPE detection checks for required safety kit in a zone, not who a person is. How event images are retained and used is decided by each site under its own policies.
